AT91SAM7S256与PCF8563 RTC及FATfs集成源码
AT91SAM7S64 256 RTC interfaced.fatfs 与 fatfs 的工作代码从陈 http://elm-chan.org/fsw/ff/00index_e.
本专区汇聚了各类基于 实时时钟 开发的源码资源,共计 174 篇资源供开发者免费下载学习。
AT91SAM7S64 256 RTC interfaced.fatfs 与 fatfs 的工作代码从陈 http://elm-chan.org/fsw/ff/00index_e.
这是用来读写DALLAS12C887的程序模块,-This is the procedure used to read and write DALLAS12C887 modules
STM32实时显示时间,在串口屏显示,高效简洁,年月日时分秒都可分别显示,通过中断方式,程序简单明了,初学者即可读懂应用
完整的代码,用于实时时钟 DS1307 interfaceing 使用 8051 微控制器,interfaceing,使用 I2C 协议也接口更好的清晰度的液晶显示
时钟芯片PCF8563的51单片机程序 时钟不超过12MHZ,本程序已在51上试过,可以用-PCF8563 clock chip clock of 51 single-chip
ds1302 汇编源代码,单片机用的是89c51调试好使-DS1302 compilation of source code, using the 89C51 single-chi
DS1302的读写,基于MS430F149的读写,简单-DS1302 reading and writing, based on reading and writing MS430
c8051f020对实时时钟芯片S3530A的读写-C8051F020 on real-time clock chip
利用8051单片机驱动DS12C887,实现实时的日历时钟显示系统设计。-8051 driver using DS12C887, real-time calendar clock
1302 的 程序代码 1302驱动程序 调试通过.rar 20051104-1302 code of 1302 through the driver debugging.
实时时钟芯片 DS12887 接口驱动的源程序-DS12887 real-time clock interface of the source drive
单片机C51控制,实时时钟程序,单片机掉电后重新启动仍能准确显示时间-C51 single-chip control, real-time clock procedures, si